Board  Details

 

Locate and size holes in a board's surfaces or edges.  SketchList 3D treats any non round cut into the board - a slot, dado, rabbet - as a hole with three dimensions specified. (height, width and depth).  A hole may go through a board entirely or partially.

Locate and size holes in a board's surfaces or edges.   SketchList 3D treats any  round cut into the board as a hole with two dimensions specified. (diameter and depth).  A hole may go through a board entirely or partially.

You can change or make copies of any existing holes.

The functions of shaping a board or applying a surface material to a board can only be accomplished on the surface of a board.

The act of applying a veneer or laminate to a board's surface.

Cutting corners off or notches in a board to change its shape.

SketchList 3D allows you to apply several types of joinery to one or more edges of a board.

<TODO>: Insert description text here...

SketchList 3D allows you to apply several types of contours to one or more edges of a board.

Notes about the board can be recorded and will appear in various reports about the board.

Using this tool you can locate and size a board within a container.

 

Watch the video.

SketchList 3D will create a default name of every board you create.  Good practice dictates that you provide your own names that will help you identify the boards as you work on the design and in the shop.